Resumo Este estudo teve como objetivo comparar a citotoxicidade dos materiais restauradores indiretos Vita AC12, Lava Ultimate, Vita Enamic e InSync. Extratos de cada material foram preparados por incubação por 1, 7 e 40 dias, com lavagem diária. Fibroblastos gengivais humanos foram expostos aos extratos e a viabilidade celular foi medida por avaliação sequencial da atividade mitocondrial (XTT), integridade da membrana (NRU) e densidade celular (CVDE). Extratos de esferas de poliestireno e fragmentos de látex foram utilizados como controles negativos e positivos, respectivamente. As diferenças entre os grupos e os tempos experimentais foram avaliadas por análise de variância. Na extração de 24 h, observaram-se diferenças significativas entre o controle e Vita AC-12 e InSync no teste do XTT (p<0,05) e entre o controle e os materiais Enamic e Lava Ultimate, no teste CVDE (p<0,05 ). AC12, Lava Ultimate e InSync apresentaram viabilidade celular significativamente menor do que o Enamic e o grupo controle, no ensaio NRU (p<0,05). Os materiais cerâmicos híbridos Vita Enamic e Lava Ultimate apresentaram melhor biocompatibilidade no ponto de tempo de extração de 24 h do que os materiais cerâmicos AC12 e InSync. No entanto, uma simulação de remoção de componentes tóxicos por fluidos biológicos, realizada com o uso de tempos de extração mais prolongados e lavagem diária, levou à ausência de citotoxicidade em todos os materiais restauradores testados. Esses achados podem ser vistos como positivos para a indicação clínica desses materiais restauradores, considerando seu contato com tecidos macios adjacentes por longos períodos de tempo.

Abstract This study aimed to compare the cytotoxicity of the Vita AC12, Lava Ultimate, Vita Enamic and InSync indirect restorative materials. Extracts of each material were prepared by incubation for 1, 7 and 40 days, with daily washing. Human gingival fibroblasts were exposed to the extracts, and cell viability was evaluated by sequential assessment of mitochondrial activity (XTT), membrane integrity (NRU) and cell density (CVDE). Extracts of polystyrene beads and latex fragments were used as negative and positive controls, respectively. Differences between groups and experimental times were evaluated by analysis of variance. At the 24 h extraction, significant differences between the control and both Vita AC-12 and InSync were observed in the XTT assay (p<0.05), and between the control and both Enamic and Lava Ultimate, in the CVDE assay (p<0.05). AC12, Lava Ultimate, and InSync presented significantly lower cell viability than Enamic and the control group, in the NRU assay (p<0.05). The Vita Enamic and Lava Ultimate hybrid ceramic-like materials presented better biocompatibility at the 24 h extraction time point than the AC12 and InSync ceramic materials. However, a simulation of the removal of toxic components by biological fluids, conducted by using longer extraction times and daily washing, led to the absence of cytotoxicity in all the tested restorative materials. These findings can be viewed as positive for the clinical indication of these restorative materials, considering their contact with adjacent soft tissues for extended periods of time.

Abstract Denture adhesives (DA) improve the retention and stability of ill-fitting dentures, especially for older adults. These materials should be biocompatible, i.e., they cannot cause undesired biological responses and be non-cytotoxic to oral tissues. However, in vitro testing of DA biocompatibility employing primary cell culture may possibly be affected by other factors, such as the donor age. Objective To compare the cytotoxicity of three different denture adhesives when assessed in primary gingival fibroblasts from a young donor or from an older donor, as well as the release of the basic fibroblast growth factor (bFGF), and the inflammatory response marker interleukin-6 (IL-6). Material and Methods Gingival fibroblasts isolated from a 30- and a 62-year-old donor were assayed for proliferation (1-7 days) and sensitivity to latex (positive control). Fibroblasts were indirectly exposed to Corega Ultra (cream), Corega powder and Fixodent Original for a 24 h period and assayed by XTT and Crystal Violet tests. The release of IL-6 and bFGF by exposed cells was determined by ELISA. Results While cells from the young donor presented higher cell growth after 7 days, the sensitivity to increasing concentrations of latex extracts was very similar between young and older cells. Both XTT and CVDE detected no difference between the DA and the control group. All materials induced higher levels of IL-6 and bFGF compared to control. Cells from the older donor exposed to Corega Ultra released lower levels of cytokine and growth factor. Conclusions All materials were considered non-cytotoxic, but affected cytokine and growth factor release. The biological differences found between fibroblasts from both donors could be due to individual or age-related factors. The authors suggest the use of cells from older donors on studies of dental products aimed at older patients, to better simulate their physiological response.

Abstract Calcium silicate-based materials have been widely studied due to their resemblance to, and similar applicability of, mineral trioxide aggregate (MTA). Among these, Biodentine™ (BD) was specifically designed as a “dentin replacement” material for applications such as root perforations, apexification, treatment of resorptive lesions, and as a retrograde filling material. The present study aimed to assess the in vitro response of human primary osteoblasts to BD using MTA AngelusTM as a reference material, by simultaneously analyzing three different cell viability parameters, namely mitochondrial activity, membrane integrity, and cell density. BD and MTA extracts were prepared by incubation on culture media for 24 h or 42 days after mixing. Primary human osteoblasts were exposed to extracts for 24 h, at 37oC with 5% CO2, and cell viability was evaluated by the XTT, NRU, and CVDE assays. Both materials induced cell viability levels higher than 70% when extracted for 24 h. However, when cells were exposed to extracts with increased conditioning times, MTA presented significant cytotoxic effects (p < 0.05) in comparison to the control and MTA at 24 h. After 42 days, the XTT assay identified a significant reduction in cell viability by BD when compared to the control (p<0.05), despite the fact that levels above the 70% viability cutoff were attained for biocompatible materials. It can be concluded that BD is cytocompatible with human primary osteoblasts, indicating its adequacy in direct contact with bone tissues.

Abstract The aim of this study was to undertake a qualitative and quantitative assessment of nanoscale alterations and wear on the surfaces of nickel-titanium (NiTi) endodontic instruments, before and after use, through a high-resolution, noncontact, three-dimensional optical profiler, and to verify the accuracy of the evaluation method. Cutting blade surfaces of two different brands of NiTi endodontic instruments, Reciproc R25 (n = 5) and WaveOne Primary (n = 5), were examined and compared before and after two uses in simulated root canals made in clear resin blocks. The analyses were performed on three-dimensional images which were obtained from surface areas measuring 211 × 211 µm, located 3 mm from their tips. The quantitative evaluation of the samples was conducted before and after the first and second usage, by the recordings of three amplitude parameters. The data were subjected to statistical analysis at a 5% level of significance. The results revealed statistically significant increases in the surface wear of both instruments groups after the second use. The presence of irregularities was found on the surface topography of all the instruments, before and after use. Regardless of the evaluation stage, most of the defects were observed in the WaveOne instruments. The three-dimensional technique was suitable and effective for the accurate investigation of the same surfaces of the instruments in different periods of time.

The aim of this study was to comparatively evaluate the bending resistance at 45º, the static and dynamic cyclic fatigue life, and the fracture type of the WaveOne (Dentsply Maillefer, Ballaigues, Switzerland) 25-08 and Reciproc (VDW, Munich, Germany) 25-08 instruments. A total of 60 nickel-titanium (NiTi) instruments (30 Reciproc and 30 WaveOne) from three different lots, each of which was 25 mm in length, were tested. The bending resistance was evaluated through the results of a cantilever-bending test conducted using a universal testing machine. Static and dynamic cyclic fatigue testing was conducted using a custom-made device. For the static and dynamic tests, a cast Ni-Cr-Mo-Ti alloy metal block with an artificial canal measuring 1.77 mm in diameter and 20.00 mm in total length was used. A scanning electron microscope was used to determine the type of fracture. Statistical analyses were performed on the results. The WaveOne instrument was less flexible than the Reciproc (p < 0.05). The Reciproc instrument showed better resistance in the static and dynamic cyclic fatigue tests (p < 0.05). The transverse cross-section and geometry of the instruments were important factors in their resistance to bending and cyclic fracture. Both of the instruments showed ductile-type fracture characteristics. It can be concluded that the Reciproc 25-08 instrument was more resistant to static and dynamic cyclic fatigue than the WaveOne 25-08 instrument, while the WaveOne 25-08 instrument was less flexible. Bending and resistance to cyclic fracture were influenced by the instruments’ geometries and transverse cross-sections. Both of the instruments showed ductile-type fracture characteristics.

The aim of this work was to evaluate the effects of different times of extraction on the cytotoxicity of six representatives of different root canal sealer groups-Real Seal SE, AH Plus, GuttaFlow, Sealapex, Roth 801, and ThermaSeal Plus-with human gingival fibroblasts. The materials were prepared according to manufacturers' specifications, and were incubated in culture medium (DMEM) at 37ºC for 1, 7, 14, 21, and 28 days, with daily washing, to simulate periodontal ligament clearance. Human fibroblasts were exposed to the final extracts at 24 hours, and cell viability was determined by MTT assay, with exposure to unconditioned DMEM as a negative control. Statistical analysis comparing cytotoxicities at each exposure time was performed by ANOVA with Scheffé adjustment for multiple comparisons at a 95% confidence level. Results indicated that GuttaFlow was significantly less cytotoxic than all other sealers (p < 0.05) at 1 day of extraction. After 7 days of extraction, cell viability for GuttaFlow was significantly increased as compared with that of all groups except sealer AH Plus. At day 14, cytotoxicity of Sealapex was significantly higher than that of all other sealers (p < 0.05). At days 21 and 28, there were no significant differences in cytotoxicity among sealer groups. All materials presented some level of cytotoxicity to fibroblasts, while GuttaFlow was the least cytotoxic sealer tested. However, the cytotoxicity of all materials seemed to decrease similarly in a time-dependent manner.